Allen凱
一般會員
積分 229
發文 22
註冊 2008-3-16
狀態 離線
|
#1 [繪圖工具][轉載][2ea3]PTC Creo Elements/Pro 5.0.200 x86 - Pro/E(ISO@3.19GB)
【軟體名稱】：PTC Creo Elements/Pro 5.0.200 x86 - Pro/E
【軟體語言】：英語
【軟體介紹】：3D 電腦輔助設計
【驗證全碼】：2ea38d1bd4b1736b341597672f6e772fedc3ef04
【檔案大小】：3.19GB
【檔案格式】：ISO
【做種期限】：載點自然死（下載人數越趨減少，請各位幫忙作種）
【參考資料】：
1.Details for PTC Creo Elements / Pro 5.0 M070 x86 Multilingual
2.官方網站（ptc.com）
【附件下載】： PTC_Creo_Elements_Pro_5_0_M070_x86_Multilingual-((Demonoid.me)).torrent (16.44 KB, 下載次數: 2437)
2011-3-20 03:16 PM 上傳下載次數: 2437
【使用說明】：假如不懂安裝，請詳閱以下說明！
01.Do the following to install this app properly.
02.
03.1) RUN Creo Installation
04.
05.2) When a new CREO window (White background with blue LOGO on center left) opens up, look at the bottom left side of that window BEFORE clicking next.
06.
07.2.1) Write down PTC HOSTID in notepad and copy that number.
08.2.2) Open "ptc_licfile" (unzip WF5_crk_ZWT folder and you will find it) in NOTEPAD.
09.2.3) Press "Ctrl" and "F" key together
10.2.4) Type "00-00-00-00-00-00" in "FIND WHAT" box and click "Find Next"
11.2.5) "00-00-00-00-00-00" will be highlighted.
12.2.6) Delete "00-00-00-00-00-00" and type in YOUR HOSTID (without " ")
13.2.7) Now, click on the "FIND" box and click "Find Next" again and repeat the process. You will have to find ALL "00-00-00-00-00-00" from the "ptc_licfile" There are so many "00-00-00-00-00-00" you will have to replace. Do this until you reach the end of the "ptc_licfile"
14.2.8) Save the "ptc_licfile" (Click YES when replacing old file window pops up)
15.
16.3) Install Creo Elements/Pro and Creo Elements/PRO Mechanica
17.
18.4) After installing, follow the steps listed below.
19.
20.Here is what you have to do after installing the software (assuming you followed the steps until this point).
21.
22.1st - Copy "proe_WF5_Win32_crk" file from unzipped WF5_crk_ZWT folder to the following folder - C:\Program Files\PTC\Creo Elements\Pro5.0\i486_nt\obj --> Double click and press click next > ok > next > ok >......> Finish > ok
23.
24.2nd - Copy "proe_mech_WF5_Win32_#1_crk" file from unzipped WF5_crk_ZWT folder to the following folder - C:\Program Files\PTC\Creo Elements\Pro5.0\mech\i486_nt\bin --> After pasting, double click on it and press click next > ok > next > ok >......> Finish > ok
25.
26.3rd - Copy "proe_mech_WF5_Win32_#2_crk" file from unzipped WF5_crk_ZWT folder to the following folder - C:\Program Files\PTC\Creo Elements\Pro5.0\mech\i486_nt\ptc --> After pasting, double click on it and press click next > ok > next > ok >......> Finish > ok
27.
28.4th - Copy "ptc_distributed_services_WF5_Win32_crk" file from unzipped WF5_crk_ZWT folder to the following folder - C:\Program Files \PTC\Creo Elements\Pro5.0\i486_nt\obj --> After pasting, double click on it and press click next > ok > next > ok >......> Finish > ok
29.
30.DO NOT DELETE YOUR "ptc_licfile" from your extracted crack folder.
http://www02.eyny.com/forum.php? ... zU2NTkyOXw2MDkxOTcy.torrent
[ Last edited by Allen凱 on 2013-9-11 at 02:25 PM ]
|
|
