Welcome to the ADSL client setup. First, I will run some checks on your system to make sure the PPPoE client is installed properly...
引用:
LOGIN NAME
Enter your Login Name (default root): ADSL提供商给的用户名，写在这里
引用:
INTERFACE
Enter the Ethernet interface connected to the ADSL modem For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where 'X' is a number.
(default eth0): eth0这是ADSL通过第一台机器router1的第一张网卡eth0提供上网
Do you want the link to come up on demand, or stay up continuously? If you want it to come up on demand, enter the idle time in seconds after which the link should be dropped. If you want the link to stay up permanently, enter 'no' (two letters, lower-case.) NOTE: Demand-activated links do not interact well with dynamic IP addresses. You may have some problems with demand-activated links.
Enter the demand value (default no):在这里按一下回车就行了。
引用:
DNS
Please enter the IP address of your ISP's primary DNS server.If your ISP claims that 'the server will provide dynamic DNS addresses',enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are doing and not modify your DNS setup.
Enter the DNS information here: 61.144.56.100这是DSN，最好用你本地电信给的
Please enter the IP address of your ISP's secondary DNS server. If you just press enter, I will assume there is only one DNS server.
Enter the secondary DNS server address here: 202.192.88.1这是第二个DNS，也是电信给的。
引用:
PASSWORD
Please enter your Password:在这里把ADSL提供商给的密码写上
Please re-enter your Password:
引用:
USERCTRL
Please enter 'yes' (two letters, lower-case.) if you want to allow normal user to start or stop DSL connection (default yes): yes
引用:
FIREWALLING
Please choose the firewall rules to use. Note that these rules are very basic. You are strongly encouraged to use a more sophisticated firewall setup; however, these will provide basic security. If you are running any servers on your machine, you must choose 'NONE' and set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you are using SSH, the rules will block outgoing SSH connections which allocate a privileged source port.
引用:
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible for ensuring the security of your machine. You are STRONGLY recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway for a LAN
Choose a type of firewall (0-2): 2
Start this connection at boot time
Do you want to start this connection at boot time?
Please enter no or yes (default no):yes
＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃
** Summary of what you entered **
Ethernet Interface: eth0
User name: ADSL用户名
Activate-on-demand: No
Primary DNS: 61.144.56.100
Secondary DNS: 202.192.88.1
Firewalling: MASQUERADE
User Control: yes
Accept these settings and adjust configuration files (y/n)?y
