t444444444
基本會員
積分 52
發文 10
註冊 2006-2-13
來自 北部
狀態 離線
|
#1 百視達6.4G片用DVDXCopy壓縮再用nero開起dvd<超刻>失敗
Kin
Kinlin
1A21-0009-5030-1565-2995-5506
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 2004/7/22 17:33:44
Nero版本: 6.3.1.25 (Nero Express)
燒錄器： <LITE-ON DVDRW SOHW-1693S>版本: KS09 - HA 0 TA 1 - 6.3.1.25
界面卡驅動程式： <atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <GIGABYTE GO-D1600E >版本: F8S1 - HA 0 TA 0 - 6.3.1.25
界面卡驅動程式： <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : GIGABYTE GO-D1600E atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3160827AS atapi Port 2 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
GIGABYTE GO-D1600E G: CDRom0
LITE-ON DVDRW SOHW-1693S D: CDRom1
AXV CD/DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047788kB)
Free physical memory: 781MB (800756kB)
Memory in use : 23 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.2.2006
UDF/ISO編製
22:21:04 #1 Phase 112 File dlgbrnst.cpp, Line 1855
重新配置DVD影片的位置
22:21:04 #2 Phase 114 File dlgbrnst.cpp, Line 1855
影片檔在DVD上配置完成(沒有更動檔案)
22:21:04 #3 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : Multibyte
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
22:21:04 #4 Phase 111 File dlgbrnst.cpp, Line 1855
DVD影片檔已排序完成
22:21:04 #5 Text 0 File Reader.cpp, Line 126
Reader running
22:21:04 #6 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
22:21:04 #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
22:21:04 #8 Text 0 File Burncd.cpp, Line 3152
Turn on 光碟一次燒錄(DAO), using DVD media
22:21:13 #9 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2355199 (523:22.49, 4599MB), real: 4489MB
Last address to be written: 2302127 (511:35.02, 4496MB)
22:21:13 #10 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: YES (enabled: CD DVD)
22:21:13 #11 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
22:21:13 #12 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Not enough free discspace.
(Medium in drive: 不明. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)
22:21:13 #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2302128 (2302128) = #2302128/511:35.3
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2302128 blocks [LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------
22:21:13 #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4714758144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2302128 | lead-out | 1 | 0x00 | 0x41
22:21:13 #15 Phase 24 File dlgbrnst.cpp, Line 1855
檔案暫存作業開始
22:21:13 #16 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
22:21:13 #17 Phase 25 File dlgbrnst.cpp, Line 1855
檔案暫存作業完成
22:21:13 #18 Phase 36 File dlgbrnst.cpp, Line 1855
以4x (5,540 KB/s)的速度開始燒錄
22:21:13 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
22:21:14 #20 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 14:16,055 (856055ms) -> OK
22:21:14 #21 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode
22:21:14 #22 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON , SMART-BURN : ON
22:21:14 #23 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: Yes
22:21:14 #24 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
22:21:14 #25 SCSI -1066 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x23 0x20 0xB0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
22:21:14 #26 CDR -1066 File ThreadedTransferInterface.cpp, Line 1614
無效的指令欄位
22:21:14 #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
無法進行光碟一次燒錄的起始動作
22:21:14 #28 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
22:21:14 #29 Phase 38 File dlgbrnst.cpp, Line 1855
以4x (5,540 KB/s)的速度燒錄失敗
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004/8/3 22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
